To
order a free catalog | Click
here |
To buy AMSOIL
products, visit the AMSOIL
Online Store
|
Buy AMSOIL at wholesale prices |
Register
to receive valuable WHOLESALE PRICING information and AMSOIL
product updates by email
AMSOIL HP Injector Synthetic
2-Cycle Oil
|
|
New AMSOIL HP Injector Synthetic 2-Cycle Oil is
a precise synthetic formulation that exceeds the lubrication
demands of modern two-cycle engines. It contains premium
synthetic base oils and MAX-DOSE additive system, providing
superior performance in direct fuel injected (DFI),
electronic fuel injected (EFI) and carbureted outboard
motors, as well as other recreational two-cycle equipment.
Product Code:
HPI
|
|
Product Description
HP Injector is a precise synthetic
formulation that exceeds the lubrication demands of modern
two-cycle motors. Today's two-cycle outboard motors operate
at higher temperatures and at leaner oil and fuel ratios than
older motors. This difficult operating environment requires
proper lubrication technology to keep motors running long
and strong. HP Injector is a premium lubricant engineered
with AMSOIL synthetic base oils and MAXDOSE advanced additives.
It contains up to 30 percent more additives than other TC-W3
two-cycle oils for "super clean" operation. And
because AMSOIL synthetic oils are more durable, they are perfect
for lean mixture operations. In addition, this AMSOIL exclusive
product produces low smoke and odor and has low aquatic toxicity
properties, making it ideal for boats.
HP Injector improves engine
life. It prevents deposits that cause ring sticking and ring
jacking (carbon build-up behind the ring, forcing it outward),
a phenomenon that occurs in modern DFI outboard motors. HP
Injector prevents wear. It has excellent lubricity properties
and provides a good lubricating oil film, protecting pistons
and bearings. HP Injector prevents rust, an important feature
where motors are subjected to water. HP Injector provides
superior performance in direct fuel injected (DFI), electronic
fuel injected (EFI) and carbureted outboard motors, as well
as other recreational equipment.
Applications
HP Injector is recommended for use
in all two-cycle outboard motors including, but not limited
to, Mercury® EFI & Optimax®, Johnson®
and Evinrude® FICHT® and E-TEC™, Yamaha®
HPDI, Nissan® and Tohatsu® TLDI®, Suzuki®,
Mariner® and Force®. Also recommended for
use in all two-cycle personal watercraft and jet boats, as
well as snowmobiles, motorcycles and ATVs.
Use as injection oil or as
50:1 pre-mix (2.6 oz. per U.S. gallon of gas) where NMMA
TC-W3 or API TC oils are specified. Compatible
with mineral and synthetic TC-W3 type two-cycle oils, however,
mixing two-cycle oils should be minimized.
|
Equipment manufacturers and motor
builders have redesigned two-cycle motors to reduce
emissions and increase economy. These changes have increased
operating temperatures, reduced oil consumption and
incorporated direct fuel injection and exhaust power
valves. AMSOIL 2-Cycle Oils are designed to maximize
performance in all types of engine designs and are optimized
for select applications
Even though AMSOIL 2-Cycle Oils have
been optimized for specific applications, they are multi-functional
and recommended for use in many areas. The chart rates
each oil's performance abilities per application as
follows:
Excellent: The primary
recommendation for the oil. The oil is specifically
designed for the operating conditions of the motors
in these markets. There is only one "Excellent"
recommendation per category.
Vey Good: A main recommendation
for the oil. Identifies an oil that is very good for
the operating conditions of these motors.
Good: A secondary
recommendation for an oil. The oil was not specifically
designed for these applications. However, the chemistry
in the oil is suited to the operating conditions of
these motors.
Not Recommended: Identifies
applications where the product was intended for use.
Racing:
(1) Not recommended for long-term
use in outboard motors as a TC-W3 type oil, although
excellent as a race oil for short term use where motors
are periodically inspected.
(2) Excellent for racing or modified
motors. Very good for recreational use.
* Recommended for all direct fuel injected
(DFI), electronic fuel injected (EFI) and carbureted
motors. Outboard motors include Mercury®, Optimax®,
Johnson® & Evinrude® FICHT® & E-TEC®,
Yamaha® HPDI, Nissan® & Tohatsu® TLDI®. |
Which
AMSOIL Products Are Recommended For Your Car or Truck?
| Click
Here And Enter Your Vehicle Information To Find Out
|
Click
It, Print It, and Mail It
|
Printable Dealer Application |
Mail
your completed dealer application to:
AMSOIL Inc., AMSOIL Building, Superior, WI 54880.
Register
to receive valuable WHOLESALE PRICING information and AMSOIL
product updates by email
I welcome the opportunity to
work with you personally as your servicing AMSOIL Dealer.
Use the information on this website to contact me. You may
also check out the AMSOIL
Corporate Website for product and business opportunity
information.
If you would
like more information about AMSOIL INC., click one of the
links below:
|
