To
order a free catalog | Click
here |
To buy AMSOIL
products, visit the AMSOIL
Online Store
|
Buy AMSOIL at wholesale prices |
Register
to receive valuable WHOLESALE PRICING information and AMSOIL
product updates by email
Thin-Film Oxygen Uptake (ASTM
D-4742)
The Thin-Film
Oxygen Uptake Test evaluates the oxidation stability of
lubricating oils. A mixture of the test oil and chemistries
found in gasoline engine operation (oxidized/nitrated fuel,
soluble metals and distilled water) are placed in a test vessel,
which is pressurized with oxygen and placed in a heated bath.
Anti-oxidant breakdown is evident when the oxygen pressure
in the vessel rapidly decreases. At this point, the induction
time (break point) of the oil is recorded. As shown in the
graph, AMSOIL Synthetic 10W-30 Motor Oil had the highest induction
time of all the tested oils. In fact, it didn't reach its
break point in over 500 minutes of testing.
The superior oxidation stability
of AMSOIL
Synthetic 10W-30 Motor Oil allows it to effectively resist
the formation of engine deposits and sludge, keeping engines
running clean and efficient and extending oil life. It also
resists thickening, maintaining its superior wear protection
and lubricating properties and maximizing fuel efficiency.
AMSOIL Synthetic 10W-30 Motor
Oil provides unsurpassed protection against engine wear. Equipment
life is extended, and repairs, downtime and expenses are reduced.
AMSOIL INC.has been the leader
in synthetic motor oil formulation since its introduction
of the world's first API rated synthetic motor oil in 1972.
By specializing exclusively in the synthetic lubricant technology,
AMSOIL is able to optimize the most advanced chemistries available.
The "Genuine Synthetic PAO Formulated" designation
displayed on AMSOIL packaging indicates that the oils are
formulated with Polyalphaolefin (PAO) synthetic base stocks.
This chemistry is the industry's premier base stock technology.
Unlike conventional mineral-based chemistries, AMSOIL PAO
base stocks contain fully saturated, hydrogenated molecules
and are free of wax and other impurities. Combined with an
exact balance of premium additives, itdelivers superior hot
and cold temperature performance, resists oxidation and acid
formation and provides long-term wear protection.
AMSOIL "General
Synthetic PAO Formulated" oils have shattered the parameters
of the most rigorous industry testing and set the standard
for all other motor oils.
Motor Oil Test and Comparison
AMSOIL Synthetic 10W-30 Motor Oil (ATM)
and 10 competing conventional and synthetic10W-30 motor oils
were subjected to a series of ASTM motor oil tests. The competing
oils included petroleum-based Castro GTX Drive Hard, Mobil
Drive Clean, Pennzoil with Purebase, Quaker State Peak Performance
and Valvoline, as well as synthetic-based Valvoline Synpower,
Quaker State, Castrol Syntec, Pennzoil and Mobil SuperSyn
Multi-Vehicle.
Seven tests were run on the
motor oils. The Thin-Film Oxygen Uptake Test (TFOUT) measures
the oxidation stability of engine oils. The High Temperature/High
Shear Test (HTHS) measures a lubricant's viscosity under severe
operating conditions. The NOACK Volatility Test measures the
evaporation loss of oils in high temperature service. Pour
Point indicates the lowest temperature at which a fluid will
flow. Total Base Number (TBN) is the measurement of a lubricant's
reserve alkalinity for combating acids. The Cold Cranking
Simulator Test (CCS) measures a lubricant's viscosity at low
temperatures and high shear rates. The Four-Ball Wear Test
measures a lubricant's wear protection properties. The impressive
test results show AMSOIL Synthetic 10W-30 Motor Oil outperformed
the competitors in each test. (More
Info)
Which
AMSOIL Products Are Recommended For Your Car or Truck?
| Click
Here And Enter Your Vehicle Information To Find Out
|
Click
It, Print It, and Mail It
|
Printable Dealer Application |
Mail
your completed dealer application to:
AMSOIL Inc, AMSOIL Building, Superior, WI 54880.
Register
to receive valuable WHOLESALE PRICING information and AMSOIL
product updates by email
I welcome the opportunity to
work with you personally as your servicing AMSOIL Dealer.
Use the information on this website to contact me. You may
also check out the AMSOIL
Corporate Website for product and business opportunity
information.
If you would
like more information about AMSOIL INC., click one of the
links below:
|
